View HUF76443P3_1009116.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HUF76443P3, HUF76443S3S
Data Sheet December 2001
75A, 60V, 0.0095 Ohm, N-Channel, Logic Level UltraFET(R) Power MOSFET Packaging
JEDEC TO-220AB
SOURCE DRAIN GATE GATE SOURCE DRAIN (FLANGE)
JEDEC TO-263AB
DRAIN (FLANGE)
Features
* Ultra Low On-Resistance - rDS(ON) = 0.008, VGS = 10V - rDS(ON) = 0.0095, VGS = 5V * Simulation Models - Temperature Compensated PSPICE(R) and SABERTM Electrical Models - Spice and SABER Thermal Impedance Models - www.fairchildsemi.com * Peak Current vs Pulse Width Curve * UIS Rating Curve * Switching Time vs RGS Curves
HUF76443P3
HUF76443S3S
Symbol
D
Ordering Information
PART NUMBER PACKAGE TO-220AB TO-263AB BRAND 76443P 76443S HUF76443P3
G
S
HUF76443S3S
NOTE: When ordering, use the entire part number. Add the suffix T to obtain the variant in tape and reel, e.g., HUF76443S3ST.
Absolute Maximum Ratings
TC = 25oC, Unless Otherwise Specified HUF76443P3, HUF76443S3S UNITS V V V A A A A 60 60 16 75 75 75 75 Figure 4 Figures 6, 17, 18 260 1.75 -55 to 175 300 260 W W/oC
oC oC oC
Drain to Source Voltage (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Drain Current Continuous (TC = 25oC, VGS = 5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Continuous (TC = 25oC, VGS = 10V) (Figure 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Continuous (TC = 100oC, VGS = 5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Continuous (TC = 100oC, VGS = 4.5V) (Figure 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Pulsed Avalanche Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UIS Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Derate Above 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T L Package Body for 10s, See Techbrief TB334. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T pkg NOTES: 1. TJ = 25oC to 150oC.
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Product reliability information can be found at http://www.fairchildsemi.com/products/discrete/reliability/index.html For severe environments, see our Automotive HUFA series. All Fairchild semiconductor products are manufactured, assembled and tested under ISO9000 and QS9000 quality systems certification.
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S
Electrical Specifications
PARAMETER OFF STATE SPECIFICATIONS Drain to Source Breakdown Voltage BVDSS IDSS IGSS VGS(TH) rDS(ON) ID = 250A, VGS = 0V (Figure 12) ID = 250A, VGS = 0V , T C = -40oC (Figure 12) Zero Gate Voltage Drain Current VDS = 55V, VGS = 0V VDS = 50V, VGS = 0V, TC = 150oC Gate to Source Leakage Current ON STATE SPECIFICATIONS Gate to Source Threshold Voltage Drain to Source On Resistance VGS = VDS, ID = 250A (Figure 11) ID = 75A, VGS = 10V (Figures 9, 10) ID = 75A, VGS = 5V (Figure 9) ID = 75A, VGS = 4.5V (Figure 9) THERMAL SPECIFICATIONS Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient RJC RJA TO-220 and TO-263 0.57 62
oC/W oC/W
TC = 25oC, Unless Otherwise Specified SYMBOL TEST CONDITIONS MIN TYP MAX UNITS
60 55 -
-
1 250 100
V V A A nA
VGS = 16V
1 -
0.0067 0.0079 0.0083
3 0.008 0.0095 0.010
V
SWITCHING SPECIFICATIONS (VGS = 4.5V) Turn-On Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-Off Time tON td(ON) tr td(OFF) tf tOFF tON td(ON) tr td(OFF) tf tOFF Qg(TOT) Qg(5) Qg(TH) Qgs Qgd CISS COSS CRSS VDS = 25V, VGS = 0V, f = 1MHz (Figure 13) VGS = 0V to 10V VGS = 0V to 5V VGS = 0V to 1V VDD = 30V, ID = 75A, Ig(REF) = 1.0mA (Figures 14, 19, 20) VDD = 30V, ID = 75A VGS = 10V, RGS = 2.7 (Figures 16, 21, 22) VDD = 30V, ID = 75A VGS = 4.5V, RGS = 2.7 (Figures 15, 21, 22) 18 235 47 116 380 245 ns ns ns ns ns ns
SWITCHING SPECIFICATIONS (VGS = 10V) Turn-On Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-Off Time GATE CHARGE SPECIFICATIONS Total Gate Charge Gate Charge at 5V Threshold Gate Charge Gate to Source Gate Charge Gate to Drain "Miller" Charge CAPACITANCE SPECIFICATIONS Input Capacitance Output Capacitance Reverse Transfer Capacitance 4115 1185 215 pF pF pF 107 59 4.1 12 27 129 71 4.9 nC nC nC nC nC 12 48 65 117 90 275 ns ns ns ns ns ns
Source to Drain Diode Specifications
PARAMETER Source to Drain Diode Voltage SYMBOL VSD trr QRR ISD = 75A ISD = 37.5A Reverse Recovery Time Reverse Recovered Charge ISD = 75A, dISD/dt = 100A/s ISD = 75A, dISD/dt = 100A/s TEST CONDITIONS MIN TYP MAX 1.25 1.0 107 275 UNITS V V ns nC
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S Typical Performance Curves
1.2 POWER DISSIPATION MULTIPLIER 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 TC , CASE TEMPERATURE (oC) 0 25 50 75 100 125 150 175 T C , CASE TEMPERATURE (oC) 80 VGS = 10V ID, DRAIN CURRENT (A) 60 VGS = 4.5V 40
20
FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE
FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE
2 1 THERMAL IMPEDANCE ZJC, NORMALIZED DUTY CYCLE - DESCENDING ORDER 0.5 0.2 0.1 0.05 0.02 0.01 PDM 0.1 t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC x RJC + TC 10-3 10-2 t, RECTANGULAR PULSE DURATION (s) 10-1 100 101
SINGLE PULSE 0.01 10-5 10-4
FIGURE 3. NORMALIZED MAXIMUM TRANSIENT THERMAL IMPEDANCE
2000
TC = 25oC FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT AS FOLLOWS: I = I25 175 - TC 150 VGS = 10V VGS = 5V
1000 IDM, PEAK CURRENT (A)
100
50
TRANSCONDUCTANCE MAY LIMIT CURRENT IN THIS REGION 10-4 10-3 10-2 t, PULSE WIDTH (s) 10-1 100 101
10-5
FIGURE 4. PEAK CURRENT CAPABILITY
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S Typical Performance Curves
1000 IAS, AVALANCHE CURRENT (A)
(Continued)
1000 If R = 0 tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD) If R 0 tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1]
ID, DRAIN CURRENT (A)
100
100s
100
STARTING TJ = 25oC
10
OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON) SINGLE PULSE TJ = MAX RATED TC = 25oC 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V)
1ms 10ms
STARTING TJ = 150oC
1
10 100 0.01 0.1 1 10
tAV, TIME IN AVALANCHE (ms)
NOTE: Refer to Fairchild Application Notes AN9321 and AN9322. FIGURE 5. FORWARD BIAS SAFE OPERATING AREA FIGURE 6. UNCLAMPED INDUCTIVE SWITCHING CAPABILITY
150 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDD = 15V
150 VGS = 10V VGS = 5V VGS = 4V 90 VGS = 3.5V
ID, DRAIN CURRENT (A)
90
60 TJ = 175oC 30 TJ = 25oC 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 TJ = -55oC
ID, DRAIN CURRENT (A)
120
120
60 VGS = 3V 30 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX TC = 25oC 0 1 2 3 4
0 VGS, GATE TO SOURCE VOLTAGE (V)
VDS, DRAIN TO SOURCE VOLTAGE (V)
FIGURE 7. TRANSFER CHARACTERISTICS
FIGURE 8. SATURATION CHARACTERISTICS
25 ID = 75A rDS(ON), DRAIN TO SOURCE ON RESISTANCE (m) 20 NORMALIZED DRAIN TO SOURCE ON RESISTANCE PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX TC = 25oC
2.5 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 2.0 VGS = 10V, ID = 75A
15
ID = 40A
1.5
10 ID = 20A 5 2 4 6 8 10 VGS, GATE TO SOURCE VOLTAGE (V)
1.0
0.5 -80 -40 0 40 80 120 160 200 TJ, JUNCTION TEMPERATURE (oC)
FIGURE 9. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT
FIGURE 10. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S Typical Performance Curves
1.2 NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = V DS, ID = 250A NORMALIZED GATE THRESHOLD VOLTAGE 1.0
(Continued)
1.2 ID = 250A
1.1
0.8
1.0
0.6
0.4 -80 -40 0 40 80 120 160 200 T J, JUNCTION TEMPERATURE (oC)
0.9 -80 -40 0 40 80 120 160 200 TJ , JUNCTION TEMPERATURE ( oC)
FIGURE 11. NORMALIZED GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE
10000 CISS = CGS + C GD
FIGURE 12. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE
10 VGS , GATE TO SOURCE VOLTAGE (V) VDD = 30V 8
C, CAPACITANCE (pF)
6
1000
COSS CDS + CGD
4 WAVEFORMS IN DESCENDING ORDER: ID = 75A ID = 40A ID = 20A 0 25 50 75 100 125
CRSS = CGD VGS = 0V, f = 1MHz 1 10 60
2
100 0.1
0
VDS , DRAIN TO SOURCE VOLTAGE (V)
Q g, GATE CHARGE (nC)
NOTE: Refer to Fairchild Application Notes AN7254 and AN7260. FIGURE 13. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE FIGURE 14. GATE CHARGE WAVEFORMS FOR CONSTANT GATE CURRENT
700 VGS = 4.5V, V DD = 30V, ID = 75A 600 SWITCHING TIME (ns) SWITCHING TIME (ns) tr 500 400 300 tf 200 100 0 0 10 20 30 40 50 td(ON) td(OFF)
1000 VGS = 10V, V DD = 30V, ID = 75A 800 td(OFF) 600
400 tf 200 tr td(ON) 0 0 10 20 30 40 50
RGS, GATE TO SOURCE RESISTANCE ()
RGS, GATE TO SOURCE RESISTANCE ()
FIGURE 15. SWITCHING TIME vs GATE RESISTANCE
FIGURE 16. SWITCHING TIME vs GATE RESISTANCE
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S Test Circuits and Waveforms
VDS BVDSS L VARY tP TO OBTAIN REQUIRED PEAK IAS VGS DUT tP RG IAS VDD tP VDS VDD
+
0V
IAS 0.01
0 tAV
FIGURE 17. UNCLAMPED ENERGY TEST CIRCUIT
FIGURE 18. UNCLAMPED ENERGY WAVEFORMS
VDS RL VDD VDS VGS = 10V VGS
+
Qg(TOT)
Qg(5) VDD VGS VGS = 1V 0 Qg(TH) Qgs Ig(REF) 0 Qgd VGS = 5V
DUT Ig(REF)
FIGURE 19. GATE CHARGE TEST CIRCUIT
FIGURE 20. GATE CHARGE WAVEFORMS
VDS
tON td(ON) RL VDS
+
tOFF td(OFF) tr tf 90%
90%
VGS
VDD DUT 0
10% 90%
10%
RGS VGS VGS 0 10% 50% PULSE WIDTH 50%
FIGURE 21. SWITCHING TIME TEST CIRCUIT
FIGURE 22. SWITCHING TIME WAVEFORM
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S PSPICE Electrical Model
.SUBCKT HUF76443 2 1 3 ;
CA 12 8 5.50e-9 CB 15 14 5.50e-9 CIN 6 8 3.90e-9
LDRAIN
rev 26 August 1999
DBODY 7 5 DBODYMOD DBREAK 5 11 DBREAKMOD DPLCAP 10 5 DPLCAPMOD EBREAK 11 7 17 18 66.05 EDS 14 8 5 8 1 EGS 13 8 6 8 1 ESG 6 10 6 8 1 EVTHRES 6 21 19 8 1 EVTEMP 20 6 18 22 1 IT 8 17 1 LDRAIN 2 5 1.00e-9 LGATE 1 9 5 4.92e-9 LSOURCE 3 7 2.39e-9 MMED 16 6 8 8 MMEDMOD MSTRO 16 6 8 8 MSTROMOD MWEAK 16 21 8 8 MWEAKMOD RBREAK 17 18 RBREAKMOD 1 RDRAIN 50 16 RDRAINMOD 2.80e-3 RGATE 9 20 0.84 RLDRAIN 2 5 10 RLGATE 1 9 49.2 RLSOURCE 3 7 23.9 RSLC1 5 51 RSLCMOD 1e-6 RSLC2 5 50 1e3 RSOURCE 8 7 RSOURCEMOD 3.20e-3 RVTHRES 22 8 RVTHRESMOD 1 RVTEMP 18 19 RVTEMPMOD 1 S1A S1B S2A S2B 6 12 13 8 S1AMOD 13 12 13 8 S1BMOD 6 15 14 13 S2AMOD 13 15 14 13 S2BMOD
S1A 12 S1B CA 13 8 GATE 1 RLGATE
DPLCAP 10
5 RLDRAIN DBREAK 11 + EBREAK MWEAK MMED MSTRO 17 18 DBODY
DRAIN 2 RSLC1 51 ESLC 50
RSLC2
5 51
ESG + LGATE EVTEMP RGATE + 18 22 9 20 6 8 EVTHRES + 19 8 6
CIN
S2A 14 13 S2B 13 + 6 8 CB + EDS 5 8 14 IT 15 17
EGS
-
-
VBAT 22 19 DC 1 ESLC 51 50 VALUE={(V(5,51)/ABS(V(5,51)))*(PWR(V(5,51)/(1e-6*475),3))} .MODEL DBODYMOD D (IS = 3.16e-12 RS = 2.54e-3 TRS1 = 2.21e-3 TRS2 = 0 CJO = 4.95e-9 TT = 6.81e-8 M = 0.50) .MODEL DBREAKMOD D (RS = 1.41e- 1TRS1 = 1.09e- 4TRS2 = 0) .MODEL DPLCAPMOD D (CJO = 3.47e- 9IS = 1e-3 0 = 0.85) M .MODEL MMEDMOD NMOS (VTO = 1.90 KP = 5 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 0.84) .MODEL MSTROMOD NMOS (VTO = 2.31 KP = 195 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u) .MODEL MWEAKMOD NMOS (VTO = 1.68 KP = 0.12 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 8.4 RS = 0.1) .MODEL RBREAKMOD RES (TC1 = 1.14e- 3TC2 = 0) .MODEL RDRAINMOD RES (TC1 = 9.91e-3 TC2 = 2.75e-5) .MODEL RSLCMOD RES (TC1 = 1.01e-3 TC2 = 3.23e-5) .MODEL RSOURCEMOD RES (TC1 = 1.00e-3 TC2 =0) .MODEL RVTHRESMOD RES (TC1 = -2.59e-3 TC2 = -8.95e-6) .MODEL RVTEMPMOD RES (TC1 = -1.56e- 3TC2 = 0) .MODEL S1AMOD VSWITCH (RON = 1e-5 .MODEL S1BMOD VSWITCH (RON = 1e-5 .MODEL S2AMOD VSWITCH (RON = 1e-5 .MODEL S2BMOD VSWITCH (RON = 1e-5 .ENDS ROFF = 0.1 ROFF = 0.1 ROFF = 0.1 ROFF = 0.1 VON = -5.00 VOFF= -3.00) VON = -3.00 VOFF= -5.00) VON = -0.50 VOFF= 0.0) VON = 0.0 VOFF= -0.50)
NOTE: For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global Temperature Options; IEEE Power Electronics Specialist Conference Records, 1991, written by William J. Hepp and C. Frank Wheatley.
(c)2001 Fairchild Semiconductor Corporation
+
-
RDRAIN 21 16
-
LSOURCE 8 RSOURCE RLSOURCE RBREAK 18 RVTEMP 19 7 SOURCE 3
VBAT +
8 22 RVTHRES
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S SABER Electrical Model
REV 26 August 1999 template huf76443 n2,n1,n3 electrical n2,n1,n3 { var i iscl d..model dbodymod = (is = 3.16e-12, cjo = 4.95e-9, tt = 6.81e-8, m = 0.50) d..model dbreakmod = () d..model dplcapmod = (cjo = 3.47e-9, is = 1e-30, m = 0.85 ) m..model mmedmod = (type=_n, vto = 1.90, kp = 5, is = 1e-30, tox = 1) m..model mstrongmod = (type=_n, vto = 2.31, kp = 195, is = 1e-30, tox = 1) m..model mweakmod = (type=_n, vto = 1.68, kp = 0.12, is = 1e-30, tox = 1) sw_vcsp..model s1amod = (ron = 1e-5, roff = 0.1, von = -5.0, voff = -3.0) sw_vcsp..model s1bmod = (ron =1e-5, roff = 0.1, von = -3.0, voff = -5.0) sw_vcsp..model s2amod = (ron = 1e-5, roff = 0.1, von = -0.50, voff = 0.0) sw_vcsp..model s2bmod = (ron = 1e-5, roff = 0.1, von = 0.0, voff = -0.50) c.ca n12 n8 = 5.50e-9 c.cb n15 n14 = 5.50e-9 c.cin n6 n8 = 3.90e-9 d.dbody n7 n71 = model=dbodymod d.dbreak n72 n11 = model=dbreakmod d.dplcap n10 n5 = model=dplcapmod i.it n8 n17 = 1 l.ldrain n2 n5 = 1.00e-9 l.lgate n1 n9 = 4.92e-9 l.lsource n3 n7 = 2.39e-9
GATE 1 RLGATE CIN LGATE
LDRAIN DPLCAP 10 RSLC1 51 RSLC2 ISCL RLDRAIN RDBREAK 72 DBREAK 11 MWEAK MMED MSTRO 8 EBREAK + 17 18 71 RDBODY 5 DRAIN 2
ESG + EVTEMP RGATE + 18 22 9 20 6 6 8 EVTHRES + 19 8
50 RDRAIN 21 16
DBODY
m.mmed n16 n6 n8 n8 = model=mmedmod, l=1u, w=1u m.mstrong n16 n6 n8 n8 = model=mstrongmod, l=1u, w=1u m.mweak n16 n21 n8 n8 = model=mweakmod, l=1u, w=1u res.rbreak n17 n18 = 1, tc1 = 1.14e-3, tc2 = 0 res.rdbody n71 n5 = 2.54e-3, tc1 = 2.21e-3, tc2 = 0 res.rdbreak n72 n5 = 1.41e-1, tc1 = 1.09e-4, tc2 = 0 res.rdrain n50 n16 = 2.8e-3, tc1 = 9.91e-3, tc2 = 2.75e-5 res.rgate n9 n20 = 0.84 res.rldrain n2 n5 = 10 res.rlgate n1 n9 = 49.2 res.rlsource n3 n7 = 23.9 res.rslc1 n5 n51 = 1.0e-6, tc1 = 1.01e-3, tc2 = 3.23e-5 res.rslc2 n5 n50 = 1e3 res.rsource n8 n7 = 3.2e-3, tc1 = 1.0e-3, tc2 = 0 res.rvtemp n18 n19 = 1, tc1 = -1.56e-3, tc2 = 0 res.rvthres n22 n8 = 1, tc1 = -2.59e-3, tc2 = -8.95e-6 spe.ebreak n11 n7 n17 n18 = 66.05 spe.eds n14 n8 n5 n8 = 1 spe.egs n13 n8 n6 n8 = 1 spe.esg n6 n10 n6 n8 = 1 spe.evtemp n20 n6 n18 n22 = 1 spe.evthres n6 n21 n19 n8 = 1 sw_vcsp.s1a n6 n12 n13 n8 = model=s1amod sw_vcsp.s1b n13 n12 n13 n8 = model=s1bmod sw_vcsp.s2a n6 n15 n14 n13 = model=s2amod sw_vcsp.s2b n13 n15 n14 n13 = model=s2bmod v.vbat n22 n19 = dc=1 equations { i (n51->n50) +=iscl iscl: v(n51,n50) = ((v(n5,n51)/(1e-9+abs(v(n5,n51))))*((abs(v(n5,n51)*1e6/475))** 3)) } }
S1A 12 13 8 S1B CA 13 + EGS 6 8 S2A 14 13 S2B
-
LSOURCE 7 RLSOURCE
SOURCE 3
RSOURCE RBREAK 17 18 RVTEMP CB + EDS 5 8 19 14 IT
15
VBAT +
-
-
8 RVTHRES
22
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
HUF76443P3, HUF76443S3S SPICE Thermal Model
REV 25 August 1999 HUF76443T CTHERM1 th 6 5.50e-3 CTHERM2 6 5 2.50e-2 CTHERM3 5 4 1.75e-2 CTHERM4 4 3 1.00e-2 CTHERM5 3 2 4.85e-2 CTHERM6 2 tl 12.55 RTHERM1 th 6 3.89e-3 RTHERM2 6 5 9.69e-3 RTHERM3 5 4 2.73e-2 RTHERM4 4 3 1.53e-1 RTHERM5 3 2 2.31e-1 RTHERM6 2 tl 3.07e-2
RTHERM1 CTHERM1 th JUNCTION
6
RTHERM2
CTHERM2
5
RTHERM3
CTHERM3
SABER Thermal Model
SABER thermal model HUF76443T template thermal_model th tl thermal_c th, tl { ctherm.ctherm1 th 6 = 5.50e-3 ctherm.ctherm2 6 5 = 2.50e-2 ctherm.ctherm3 5 4 = 1.75e-2 ctherm.ctherm4 4 3 = 1.00e-2 ctherm.ctherm5 3 2 = 4.85e-2 ctherm.ctherm6 2 tl = 12.55 rtherm.rtherm1 th 6 = 3.89e-3 rtherm.rtherm2 6 5 = 9.69e-3 rtherm.rtherm3 5 4 = 2.73e-2 rtherm.rtherm4 4 3 = 1.53e-1 rtherm.rtherm5 3 2 = 2.31e-1 rtherm.rtherm6 2 tl = 3.07e-2 }
4
RTHERM4
CTHERM4
3
RTHERM5
CTHERM5
2
RTHERM6
CTHERM6
tl
CASE
(c)2001 Fairchild Semiconductor Corporation
HUF76443P3, HUF76443S3S Rev. B
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM
DISCLAIMER
FAST (R) FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM
OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench (R) QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER (R)
SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET (R)
VCXTM
STAR*POWER is used under license
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. H4

▲Up To Search▲

Price & Availability of HUF76443P3

	To Download HUF76443P3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .